Incremental Rotay Encoder E6c2-Cwz6c 360p/R

Basic Info.

Model NO.:E6C2-CWZ6C 360P/RType:Rotary Encoder
Working Principle:IncrementalReadout Mode:Contact
Operating System:Magnetoelectric TypeSignal Output:Complementary Push-pull Output
Axle Sleeve Type:Empty TypeInstallation Form:Axonia
Brand:IDENCODERAxonia:Clamping Flange Type
Outer Diameter:25mmTrademark:IDENCODER
HS Code:8543709990

Product Description

         E6C2-CWZ6C 360PR


E6C2-CWZ6C 1000P Incremental Rotary Encoder 50mm Dia Shaft 8E6C2-CWZ6C 1000P Incremental Rotary Encoder 50mm Dia Shaft 8Product Name: E6C2-C 

Product introduction:
Firm& simple
Seal bearing, realize drip-proof and oil-proof performance of IP6f4
Enhance the performance of shaft load resistant, realize radial load of 50N and axial load of 30N.
The cable leading method is slanting, including transverse and back direction.
With protection circuit against reversing connection and load short circuit, improve reliability.
(also has linear driver output) Product Category: Outside diameter 50(slim type) PCB Sensors 
1.Encoding method Incremental 
2.Power supply voltage 5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)E6C2-CWZ1X 500P/R 2M PCB Sensorsdata sheet

Encoding methodIncremental
Power supply voltage5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)
Current consumption160mA DC Max.
Inrush currentCurrent: approx. 9 A (Time: approx. 0.3 ms)
Resolution (Single turn type)500 P/R
Output phasesA, -A, B, -B, Z and -Z
Control output (Output type)Line driver output
Control output (Load current)High level(Io): -20 mA
Low level(Is): 20 mA
Control output (Output voltage)Vo: 2.5 V Min.
Vs: 0.5 V Max.
Starting positional pointEquipped
Max. response frequency100 kHz
Phase difference on output90 DEG -45 to +45 DEG
Rise and fall times of outputRise time of output: 0.1 us Max.
Fall time of output: 0.1 us Max.
(Cable length: 2m, Io: -20mA Is: 20mA)
Starting torqueRoom temperature: 10 mN.m Max.
Moment of inertia3*10-7kg.m2 Max.
Shaft loadingRadial: 50 N
Thrust: 30 N
Max. permissible rotation6000 r/min
Mechanical life expectancy100 million rotations Min.
Ambient temperatureOperating: -10 to 70 CEL
Storage: -25 to 85 CEL
(with no icing or condensation)
Ambient humidityOperating: 35 to 85 %RH
Storage: 35 to 85 %RH
(with no condensation)
Insulation resistance20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength500 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance10 to 500 Hz, 2-mm or 150m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance1000m/s2 for 3 times each in X, Y, and Z directions
Degree of protectionIEC60529: IP64
Company standard: Oil resistance
Applicable standard (EC Directive (EMC Directive))EMI: EN50081-2
Emission Enclosure: EN55011 Group 1 classA
Emission AC mains: EN55011 Group 1 classA
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
CE marking: Equipped
Connection methodPre-wired models (Cable length: 2 m)
Material (case)Zinc alloy
Material (body)Aluminum
Material (shaft)SUS420J2
Tightening torque0.5 N.m Max. (with M4 screw)
Weight (packed state)approx. 400 g
AccessoriesInstruction manual